• Circular aperture and vertical slits are designed on 40mm circular steel painted disc.
• Can be mounted using a lens holder.
• Diameter or width of aperture/ slit can be provided according to custom requirement.

• Used for holding two rods simultaneously.
• It provides capability of holding secondary rod at 90° from primary rod.
• It can hold rods up to 12mm diameter.

• For holding thick objects.
• This unit has adjustable screws for alignment of the objects, tubes etc.
• Accepts dia 20-50mm.

• It can hold four filter or lenses in single holder.
• The wheel can be rotated and positioned at a desired location.
• It can be used in optical system using post with M4 thread.

• This can hold various diameter objects and light source through a single holder.
• Range of diameter for holding:
     OM-1581        27-46mm
     OM-1583       38-74mm

• Two axes of angular adjustments allowing a mounted component that can be oriented parallel to the arbitrary plane.
• Two arbitrary head provide for angular adjustment up to ±4°.
• Strong springs provided for greater stability.
• The mount is provided with M4 tapped hole at the bottom.

• Easy to use prism table on spectrometer.
• Accepts maximum 40mm height of prisms.
• Diameter of table 85mm.

• Eyepiece contains a travelling stage with 15mm micrometer.
• 10x/15x microscopic eyepiece.
• The mount is provided with M4 tapped hole at the bottom.

The finger clamp used to hold glass tube and rods during experiments.

•  Fork is used for clamping posts at a desirable position on optical breadboard.
• Manufactured with aluminum alloy and given black anodized finish.
• M6 CBR slot provided for hold on breadboard.

• Holds Fresnel Bi-Prism 40x30mm.
• Frame: Rectangular 70x90mm.
• Rotation : Coarse Manual 360°.
• Fine: ±4° By Tangent Screw.
• Provided with M4 threaded hole for mounting of stand rod.

• Useful for holding diffraction gratings.
• Easily mount on prism plate.

It is suitable for holding rectangular diffraction gratings and filters.

• Optical breadboards are a relatively portable platform for building an optical setup on a flat surface.
• A flat stainless steel surface with M6 holes spaced by 25mm.
• 4 Leveling screws are provides.
• Available size 600 X 450mm and 800 X 600mm.

Perfect for small adjustments of angles between two rods.

• Ideal for aligning circular components of dia 30mm.
• Kinematic angular range ±4°.
• Stronger Springs provided for greater stability.
• High precision stainless steel adjustment screws.
• The mount is provided with standard M4 tapped screw thread at the bottom but custom mounting holes can be provided as desired.

• Two axes of angular adjustments allowing a mounted component to be oriented parallel to arbitrary plane.
• Three arbitrary head provide for angular adjustment.
• Strong springs provided for greater stability.
• The mount is provided with M4 tapped hole at the bottom.

Diameters available

OM-0064           12mm
OM-0066           25mm

• Ideal for aligning He-Ne Laser of dia 44.5mm.
• Kinematic angular range ±4°.
• Stronger Springs provided for greater stability.
• High precision stainless steel adjustment screws.
• The mount is provided with standard M4 tapped screw hole at the bottom.

Note : Can be designed for custom diameter

• This laser mount is useful for holding a He-Ne laser tube.
• It can be mounted using standard posts having M6 tapped holes.
• The posts holders provide good stability & centering can be adjusted through it.

• For holding Diameter 40mm lenses, mirrors or filters.
• Lenses are held by a retaining ring inside a threaded bore.
• Lens mounts are manufactured with aluminum alloy and given.
• Lens holder can be customized as per customer’s optics size or requirements.
• The mount is provided with M4 tapped hole at the bottom.

Linear Stage 13mm

• Table Size 50x50mm.
• Travel Range 13mm with 0.01 least count.
• High quality micrometer head with 0.5mm pitch.
• 9-M4 holes at 20mm center to center
      OM-0055CRB      Crossed – Roller Bearing
      OM-0055BB         Ball Bearing

Linear Stage 25mm

• Table Size 76x76mm.
• Travel Range 25mm with 0.01 least count.
• High quality micrometer head with 0.5mm pitch.
• 9-M6 holes at 25mm center to center.
       OM-0057CRB       Crossed – Roller Bearing
       OM-0057BB          Ball Bearing

• Slides are held on optical bench using slide mount and easily rotated using rotation stage.
• Slide can rotate by 360° manually.
• The mount is provided with M4 tapped hole at the bottom.

• Base are manufactured with aluminum alloy and given black anodized finish.
• It can be locked anywhere on optical breadboard by using two M6 bolts.
• Easy to shift the centering of base up to 19mm on breadboard.

• Newton ring plates mount is used for holding two plates on optical bench in Transmission type Newton ring interferometer.
• It contains three screws for changing the space and angle between plates.
• It can hold 60mm diameter plate and provide 40mm aperture for experiments.
• The mount is provided with M4 tapped hole at the bottom.

• Ideal for centering circular components.
• X-Y range ±2mm.
• High precision stainless steel adjustment screws.
• The mount is provided with standard M4 tapped screw thread at the bottom but custom mounting holes can be provided as desired.

• Precise rotation of polarizer plate is possible using polarizer rotation mount.
• It can hold polarizer plate of dia 25mm inside a threaded hole tightened with a retaining ring.
• It can be rotated by 360°.
• The mount is provided with M4 tapped hole at the bottom.

• Posts are made of stainless steel with diameter 10mm.
• M4 tapped hole at one end and M6 tapped hole at other end.
• Length of post as per customer requirement.

• Posts are made of stainless steel with diameter 10mm.

 

• M4 thread is provided on the top of the post for mounting objects on it.

 

• Any other custom rod can be made as per customer requirement.

•  Manufactured by Aluminium.
• Maximum aperture of 5mm.
• Working Length of 12mm.
• Reading of micrometer corresponds to the width of the slit.

• Pressure cell has a hollow tube of length 80mm sealed from both side by transparent plate.
• It contains two nozzles which are used for connecting pressure gauge and pressure pump.
• The mount is provided with M4 tapped hole at the bottom.

• It is useful to hold various kinds of prisms and cubic beam splitters.
• It can hold prism up to 30mm height.
• It can be mounted using standard posts having M6 thread.

• It is a 360 degree rotatable post base.
• It can hold 10 mm diameter standard posts.
• Manufactured with aluminum alloy and given black anodized finish.

• It helps to fix posts or post holders at convenient horizontal angle on breadboard.
• M6 clearance slots and C’bored holes.
• Manufactured with aluminum alloy and given black anodized finish.

• Suitable for experiments where frequent replacement of lens is required.
• Lens is held using three spring loaded calipers.
• The calipers are released by two levers projecting from mount.
• It can hold lens up to 50mm diameter.

• 15mm Travel micrometer.
• Steel linear bearings for precision motion and long life.
• Modular Design for XY, XZ, and XYZ Configurations.
• It is provided with the micrometer drive, which has a 15mm range with least count 0.01mm.
• The stage contains M4 tapped screw in the centre.
• Custom mounting holes can be provided as desired.

• It is suitable for small components.
• It can holds  2-24mm diameter objects.

•  It is used to spatial filter the laser light during experiments.
• Fine XY adjustment facility provided for objective.
• The distance between the objective mount and pinhole mount can be varied from 35 mm to 50mm to accommodate various objective sizes.

• Post bases can be used to mount post holders anywhere on breadboard.
• Manufactured with aluminum alloy and given black anodized finish.
• M6 mounting holes provided for hold on optical table.

Available Models :

OM-3310

OM-3320

OM-3330

• Useful for clamping component base to the optical table irrespective of the M6 tapped hole on the table.
• Manufactured with aluminum alloy and given black anodized finish.
• M6 mounting holes provided for fixing on optical table.

Models Available:

                          OM-3210
                          OM-3220
                          OM-3230

• Simple Telescope.
• Focusing is done by rack and pinion.
• Dia.  35mm FL 175mm AR coated objective.
• With Cross-line Graticule.

• It provides non – rotating height adjustment by rotation ring.

 

• Height adjustable range upto 15 mm.

 

• Can hold 10 mm diameter standard posts.

 

• Manufactured with aluminum alloy and given black anodized finish.

• The translation stage can be custom designed to hold objects for lateral movement.
• Travel 60mm (30-0-30 scale) with 1mm least count.
• The stage is provided with M4 tapped hole at the bottom.

• Vacuum cell has a hollow tube of length 80mm sealed from both side by transparent plate.
• It contains a nozzle which is used for connecting a vacuum pump to cell. .
• The mount is provided with M4 tapped hole at the bottom.

• Useful for vertical adjustments.
• Accepts diameter 10mm rods and standard M20 attachments.
• Approx 45mm travel.
• Rack and pinion sturdy mechanism.